Aztech 56K PCI Modem Bedienungsanleitung PDF herunterladen (Seite 25)

TECHNICAL REFERENCE

Fax Commands

+FCLASS=n Sets the mode of operation

FCLASS=0 Data mode

FCLASS=1 Group 3 Facsimile Service Class 1 mode

FCLASS=2.0 Group 3 Facsimile Service Class 2.0 mode

FCLASS? Displays the current FCLASS mode (see mode descriptions above)

+FCLASS=? Displays the FCLASS mode options (see mode descriptions above)

+FTS=n Stops the fax transmission. Then the modem waits for a specified time before OK appears on

screen. The pause is set in 10 millisecond intervals. n is the number of 10 millisecond intervals

that pass before OK appears. (n=0-255)

+FRS=n Makes the modem wait for a specified length of silence before sending OK to the screen. The

pause is set in10 millisecond intervals. n is the number of 10 millisecond intervals that pass

before OK appears.(n=0-255)

Note: This command terminates with OK when either the specified amount of silence is

detected or when the user anything (which is ignored).

+FTM=n Transmits data using the modulation specified by n.(n = 3, 24, 48, 72, 96, 97, 98, 121, 122,

145, or 146)

Note: See the “Screen Messages” table at the end of this section for an explanation of

messages that appear in response to this command.

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

Keine Kommentare

Aztech 56K PCI Modem Bedienungsanleitung Seite 25